Caliber 9x19 mm NATO

Semi-Automatic Pistol

TM-X / TM-9X

Safety you can depend on

The TM-X / TM-9X Pistol combines the latest developments and features of cutting edge firearm technology not only with regards to quality standards, precision and durability but also considering the strictest safety requirements.

Key Features Variants Specifications Delivery Package Testimonials
TM-X / TM-9X
Standard Pistol

TM-X / TM-9X

Key Features

State-of-the-art characteristics are the answer to the requirements of a modern pistol:

2 Trigger Systems
DARE - resets the firing-pin after 3mm release, allowing fast precision taps
SPEAR - lighter trigger pull and fires only when the trigger is fully pulled

Polymer Frame
- Enormous weight reduction

Low Bore-Axis
- Significant recoil reduction with extremely low bore-axis (22mm)

Grip
- 3 interchangeable back straps to adjust to the hand size of the shooter

Chamber Indicator
- Visual and tactile chamber indicator, whether a cartridge is chambered or not

Sights
- Steel three-dot sights, standardized dovetail mounting system

Armorer Tool
- Built-in armorer pin-punch for emergency manipulations and secure attachment of a lanyard

Picatinny rail
- Mount tactical lights and laser modules

DARE Trigger System
The trigger operation is striker-fired and its special DARE System (Double Action Rapid Engagement) resets the firing-pin after a 3mm release of the trigger. This allows fast precision taps after the first round fired in Double Action. After a misfire there is no need to rack the slide, a second striker action can be initiated by simply pulling the trigger again. There is no need to pull the trigger in order to disassemble the firearm. This helps to prevent accidental discharges during cleaning procedures.
SPEAR Trigger System
There is also an optional trigger system available, offering a lighter trigger pull. The so called SPEAR System (Semi Precocked Enhanced Action Reset) is fully interchangeable with all pistols and can be installed by simply replacing the DARE trigger bar with a SPEAR trigger bar, equipped with trigger safety and inserting a spacer into the rear block of the trigger system. The trigger bar is then prevented from moving downwards to engaged position and the pistol operates on SPEAR mode. The combination of the internal safeties provides a safe trigger system, allowing the pistol to fire only when the trigger is fully pulled.
Polymer Frame & Picatinny Rail

The TM-X / TM-9X pistol comes with a rigid and ergonomic polymer frame, which not only leads to an enormous weight reduction but also offers some special features such as a Picatinny equipment rail to mount tactical lights and laser modules. The slide rails are not moulded into the polymer but have an integral steel inlay in order to make them resistant to any kind of frame flex. An enlarged trigger-guard allows the use of gloves. Optional frame colors: Desert Tan, OD Green, Urban Gray

Low Bore-Axis (22mm)
The bore axis is extremely low (distance between barrel center and beaver-tail). The extraordinary design of the slide and the ergonomic grip made it possible to provide a system with a bore-axis being almost 10mm lower than most comparable polymer-pistols. This guarantees a felt recoil reduction and the fastest possible target acquisition after every round fired.
Interchangeable Back Straps
The pistol can be adjusted to an individual shooter's hand by changing the grip size. Each pistol set is delivered with 3 different back-straps which, can be mounted by simply using the built in armorers tool. They are available in the sizes small, medium and large and change the trigger-distance (from trigger point to the beaver-tail). The pistol is supplied with the medium size fitted as standard.
Hardness and Surface Treatment
The barrel and slide are machined from solid stainless steel bars and undergo a special surface treatment to guarantee extreme hardness and corrosion resistance. All remaining metal parts within the system are also treated with special anti-friction and anti-corrosion processes. This allows us to give an extended 50.000 rounds guarantee on all main parts of the pistol.
Sights & Chamber Indicator

Pistols are supplied as standard with steel three-dot sights. Night sights of any renowned manufacturer can be used on the standardized dovetail mounting system.

The extended extractor is a visual and tactile chamber indicator, showing the user at any time whether a cartridge is chambered or not.

Built-in Armorers Tool
The cavity between the back-side of the magazine well and the back-strap of the grip was used to implement an armorers pin-punch to allow emergency manipulations that would go beyond a classic field-strip. But the tool has also got a second function and allows for the secure attachment of a lanyard.
Magazines & Release Catch
Each pistol set comes with two magazines of 17 or 15 rounds capacity in 9mm. The magazine tubes are made of anti-corrosive steel with a special anti-friction coating to provide maximum speed and durability in real-world scenarios. The ammunition capacity can be checked on the back-side indicator of the mag-tube and the polymer floor-plate allows to drop the magazine in a fast change without damaging the coating.
The polymer receiver is fully ambidextrous, the magazine release catch can be pushed from either side without the need to change for left or right hand use.
TM-X / TM-9X
Standard Pistol

TM-X / TM-9X

Variants

The TM-X / TM-9X pistol comes in three different sizes and is available with two trigger systems, two slide profiles and four frame colors. All variants can be equipped with a wide range of accessories like red dot sights, tactical lights, laser modules, silencers and holsters.

3 Size Variants

Standard
[ X / 9X ]
Compact
[ XC / 9XC ]
Sub Compact
[ XSC / 9XSC ]

2 Trigger Systems

DARE

[ Double Action Rapid Engagement ]
Resets the firing-pin after 3mm release, allowing fast precision taps

SPEAR
[ Semi Precocked Enhanced Action Reset ]
Lighter trigger pull and fires only when the trigger is fully pulled

2 Slide Profiles

Square
[ X ]

Standard square slide

Angle Cut
[ 9X ]
Long opening angle cut on the front half of the slide

4 Polymer Frames

Colors

The rigid and ergonomic polymer frame is available in these colors: Black, Desert Tan, OD Green, Urban Gray

TM-X / TM-9X
Standard Pistol

TM-X / TM-9X

Specifications

All specifications are for information purposes only and may be subject to changes according to our production and quality procedures.

Weapon /
Slide Profile
Pistol Size
TM-X / TM-9X
Standard Pistol
TM-XC / TM-9XC
Compact Pistol
TM-XSC / TM-9XSC
Sub Compact Pistol
NATO
Stock Number
1005-77-000-0001
-
-
Caliber
9x19 mm NATO
9x21 mm
Length
187 mm
173 mm
170,8 mm
Height
139 mm
127 mm
113,7 mm
Width
30 mm
Line of sight
165 mm
153 mm
137 mm
Barrel length
113 mm
101 mm
86,1 mm
Rifling
6 grooves right 250 mm
Magazine capacity
17 rds
15 rds
10 rds
Weight (empty)
800 g
750 g
700 g
Weight (loaded)
1000 g
970 g
845 g
Bore Axis
22 mm
Distance
Trigger-Grip
73 mm
Trigger System
DARE (Double Action Rapid Engagement)
SPEAR (Semi Precocked Enhanced Action Reset)
Trigger Travel
DARE 18 mm / SPEAR 8 mm
Trigger Pull
DARE 3.5 kg / SPEAR 2.5 kg
TM-X / TM-9X
Standard Pistol

TM-X / TM-9X

Delivery Package

The standard delivery package of the TM-X / TM-9X pistol system includes the following:

1
Compact Size Pistol 9 x 19 mm with fixed steel sights
3
Interchangeable back straps for grip size adaption (large/medium/small)
2
Magazines
1
Hard case (optional soft case)
1
Cleaning kit
1
Manual
TM-X / TM-9X
Standard Pistol

TM-X / TM-9X

Testimonials

Find the latest expert and customer reviews about the TM-X / TM-9X.

Customers

James, USA
«I purchased one of your fine handguns and I am more than pleased. The quality is top notch, it's accurate and it fits my hands very well. It's a fine handgun that meets or exceeds anything else on the market. I'd definitely pick up a compact model if they become available. Thank you and keep up the good work.»

Let us know what you think
We at TARA believe in the importance of customer care, and we are dedicated to providing high-quality products that suit your needs. We invite you to share your opinions with us, so that we can enhance and improve our products.

TM-X / TM-9X
Scroll to top
Small Arms
Overview
TM-X / TM-9X
Standard Pistol
TM-XC / TM-9XC
Compact Pistol
TM-XSC / TM-9XSC
Sub Compact Pistol
TM-9 SMG
Submachine Gun
TM-M4A1
Assault Rifle
TM-10
Assault Rifle
Scroll